Map · Switch on in the Layers menu
Map layers: streams, drains and farm features over any property
Switch on the streams, drains, ponds, bridges, tracks, buildings and bush LINZ has mapped, over the aerial photo, the topo map or shaded relief, and under any tool you are running.
The layers come from the LINZ 1:50,000 topographic map and other LINZ datasets. They are the reference features you would otherwise trace by hand for a farm map: where the mapped waterways run, which of them are drains, where the crossings and stopbanks are, and what is in bush or scrub. Free to use, no login.
How to use them
- Open the Layers menu at the top of the map. On a phone it is inside the Map menu.
- Switch on the layers you want. Each draws once you are zoomed in close enough; the legend at the bottom of the map says when one is waiting for you to zoom in.
- Under a layer that is on, Filter and style hides the types you do not need (trees, say, or tracks) and Stand out draws it thicker and stronger over a busy photo.
- Click a feature for its name and type. The legend at the bottom of the map folds open one layer at a time.
- Run any tool as usual. Flow Paths over Mapped water shows at a glance which water paths LINZ has mapped and which it has not.
Your choice of layers is remembered in this browser.
The layers
Water
Mapped water
Show on the map →Streams, rivers, lakes, swamps, drains, canals, ponds.
Types: Stream or river, River (wide channel), Lake, Lagoon, Swamp, Spring, Small lake or dam, Drain, Canal, Water race, Pond, Reservoir, Hydro lake, Dam.
Drawn by LINZ at 1:50,000 scale, so a line can sit some metres off the real channel. Small farm drains, dams and ponds are mostly not mapped. Not a legal or regulatory boundary.
Crossings and water structures
Show on the map →Bridges, fords, stopbanks, floodgates, siphons, spillways.
Types: Bridge, Ford, Stopbank, Embankment, Floodgate, Siphon, Spillway edge.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing.
Farm
Buildings
Show on the map →Building outlines traced from recent aerial photos.
Types: Building.
LINZ NZ Building Outlines, traced from aerial photos: current to the photo date, not from building consents.
Farm features
Show on the map →Stockyards, tanks, wells, windmills, fences.
Types: Stockyard, Tank, Well, Windmill, Fence.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing. Fences in particular are only partly mapped.
Access
Roads and tracks
Show on the map →Roads with their names and surface, farm and walking tracks.
Types: Road, Track.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing.
Land
Vegetation
Show on the map →Native and exotic forest, scrub, shelter belts, orchards, vineyards.
Types: Native forest, Exotic forest, Scrub, Scattered scrub, Shelter belt, Orchard, Vineyard, Tree.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing. A rough land cover, not a survey.
Ground
Show on the map →Slips, cliffs, shingle, sand, mud, quarries, gravel pits.
Types: Slip edge, Cliff edge, Shingle, Sand, Mud, Quarry, Gravel pit.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing. Slips are as mapped by LINZ, not a hazard assessment.
Names and context
Place names
Show on the map →NZ Gazetteer names, and the original Māori names with their kōrero.
Types: Place name, Tangata whenua place name.
NZ Gazetteer (NZGB) names, with their official status, and Tangata Whenua Place Names: the original Māori and Moriori names published by the NZ Geographic Board in 2023.
Pastoral leases
Show on the map →South Island Crown pastoral lease boundaries.
Types: Pastoral lease.
LINZ South Island Pastoral Leases: Crown land leased for pastoral farming. Boundaries are indicative.
Constraints
Power and pipelines
Show on the map →Powerlines and pipelines, for where not to dig or build.
Types: Powerline, Pipeline.
From the LINZ 1:50,000 topographic map: indicative, and small or recent features may be missing. Not a substitute for a service locate before digging.
For a freshwater farm plan
A freshwater farm plan needs maps of a long list of features. The layers cover the mapped ones; the LiDAR tools fill in what the topographic map is too coarse to show. Neither replaces walking the farm.
| Map requirement | Layer | Tools that add to it |
|---|---|---|
| Surface freshwater bodies | Mapped water: streams, rivers, lakes, lagoons, swamps, springs | Flow Paths and Wetness Map for the ones not mapped |
| Artificial freshwater bodies | Mapped water: drains, canals, water races, ponds, reservoirs, dams | — |
| Fencing to exclude stock | Mapped water, with the both-banks fence length in Property | Measure for your own fence lines |
| Freshwater crossings | Crossings and water structures: bridges and fords (not culverts) | Catchment for the area draining to a culvert |
| Farm accessways | Roads and tracks | Route Explorer for a new track |
| Stock and farm infrastructure | Buildings, Farm features (stockyards, tanks, wells, fences) | — |
| Soil erosion and landform | Ground (slips, cliffs, quarries), Vegetation | Slope & Aspect, Landforms, Elevation Change |
| Catchment context and traditional names | Place names, including Tangata Whenua Place Names with their kōrero | Catchment and Downhill Path |
The full list, and which maps you will need from elsewhere (soils, effluent areas, bores), is in Farm maps for a freshwater farm plan.
Limits
- Drawn at 1:50,000, so a line can sit some metres off the real feature, and small or recent features may be missing. Most farm drains, dams and ponds are not mapped.
- Natural or artificial is how LINZ mapped a water body, not a legal ruling. Your regional council decides what counts as a river, drain or wetland.
- Culverts are not on the topographic map.
- Building outlines are traced from aerial photos and are current to the photo date, not to building consents.
- Powerlines and pipelines are indicative. Get a service locate before you dig.
Data and attribution
Mapped water from LINZ NZ Topo50 hydrography (1:50k), sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0. Names from LINZ NZ River Name Lines (Pilot), not official names.
Map layers: LINZ Data Service, CC BY 4.0: NZ Topo50 (crossings, farm features, roads and tracks, vegetation, ground, powerlines and pipelines), NZ Building Outlines, NZ Gazetteer place names, Tangata Whenua Place Names (NZ Geographic Board, 2023) and South Island Pastoral Leases. Saved images carry the credit automatically.
Questions
Where does the water layer come from?
From NZ Topo50, the LINZ 1:50,000 topographic map of New Zealand, through the LINZ Data Service. LINZ maps streams and rivers, lakes, lagoons, swamps and springs, and separately the drains, canals, water races, ponds, reservoirs and dams people have made. The site keeps those apart, natural and artificial, the way a freshwater farm plan asks for them.
Why is my farm drain or dam not on the map?
The map was drawn at 1:50,000, so most small farm drains, dams and ponds were never mapped, and newer ones are missing. Flow Paths and the Wetness Map work from the LiDAR ground model instead and show where water actually gathers, mapped or not.
Is a stream on this map legally a river?
Not necessarily. Natural or artificial is how LINZ mapped the feature, not a ruling on what counts as a river, a drain or a wetland under the rules. Your regional council decides that, and the line itself can sit some metres off the real channel.
Why do some layers not appear when I switch them on?
Each layer draws once you are zoomed in close enough, because the data is detailed. The legend at the bottom of the map says when a layer is waiting for you to zoom in. Buildings need the closest zoom; pastoral leases show from further out.
Can I download the layers?
The mapped water inside a property is part of the property data ZIP, as GeoJSON, KML and a DXF with one layer per kind, which needs a pass. The other layers are for looking at on the map; Save image keeps a picture of the map with the layers on, free, with the LINZ credit stamped on it.
Are culverts shown?
No. The topographic map shows bridges, fords, floodgates and siphons, but not culverts. You can draw your own culverts and drains in the water tools so Flow Paths and Catchment route water through them.
Related
- Property — the mapped water inside a title, with lengths, areas and fence length.
- Flow Paths — where water runs from the LiDAR ground model, mapped or not.
- Catchment — all the land draining to a point on a stream or drain.
- Natural or artificial? Streams, drains and ponds on a farm map
- What catchment am I in?
- Stream crossings and farm tracks on your farm plan map
- The traditional name of your stream or river
- How much riparian fencing do I need?