Critical Source Areas: Map Them on Your Farm

Where does water flow across your farm, where could it carry sediment and nutrients into a waterway, and where would a fence or a planted strip do the most good? Start with a map of where the runoff gathers.

Most of the sediment, nutrients and bacteria that leave a farm in runoff leave from a small part of it. Those parts are called critical source areas: the gully that runs after every heavy rain, the swale across the winter crop paddock, the hollow by the gateway where water sits and stock pug it up. Find them and manage them, and you deal with a large share of the loss on a small share of the land.

New Zealand’s 2020 freshwater regulations described a critical source area as a landscape feature such as a gully, swale or depression that accumulates runoff from adjacent land and delivers, or could deliver, contaminants to a river, lake, wetland or drain. DairyNZ and regional councils use the same idea. Two things make one: the shape of the land gathers water there, and what happens on that ground gives the water something to carry.

What the shape of the land can tell you

The first half is a terrain question, and LiDAR answers it well. LINZ publishes a ground model built from airborne laser surveys, fine enough to show a swale you would step across without noticing. Route water over that model and you get a map of how water moves across your farm:

  • Gullies and swales show up as flow paths, each with the hectares of land draining through it.
  • Depressions show up as ponding: the hollows that fill before they spill.
  • Wet flats and seeps show up on the wetness map, where a lot of land drains onto gentle ground.
  • Steep faces, where runoff picks up speed and soil, show up on the slope map.

The second half is yours. The map does not know what is grazed, what is cropped, where the tile drains run or which gully is already fenced and planted. It shows the likely critical source areas. You decide which are real.

Map where runoff gathers on your farm

Select the titles or draw a box, then run Flow Paths. Tap any line to see how much land drains through it. Free to use, no login.

Open Flow Paths →

Map them in seven steps

01

Load the farm, or one block of it

Search the address and click the title. Shift-click to add more titles, up to 25, or draw a box around one block. Land above the boundary is still read, so water arriving from the neighbours is counted at its true size.

Property →
02

Run Flow Paths

Each line is a route runoff would take across the ground, drawn thicker and paler the more land drains through it. These are your gullies and swales. Follow each one downhill and note where it meets a stream, a drain or a wetland.

Flow Paths →
03

Tap the paths that cross worked ground

Tapping a line shows the hectares draining through it. A swale fed by half a hectare and one fed by thirty are not the same job. The bigger the area, the more water the path carries and the more it can move.

Flow Paths →
04

Switch to Ponding

Ponding shows the depressions: where water would stand once the hollows fill, with depth, area and volume. These are the spots that pug under stock and the places runoff slows down and drops what it carries.

Flow Paths →
05

Check the wet ground and the steep ground

The Wetness Map ranks the block from dry ridges to the flats where the shape of the land concentrates water. Slope & Aspect shows how steep each face is. Runoff starts on the steep faces and gathers on the wet ones.

Wetness Map →
06

Measure what feeds each one

Click the bottom of a gully or swale. Catchment maps all the land draining to that point, in hectares, which tells you whether a fence, a sediment trap or a planted strip there would catch the runoff of one paddock or five.

Catchment →
07

Walk it

Take the map into the paddock, ideally after rain. Mark what the terrain got right, what a drain or culvert has changed, and which paths run through crop or heavily stocked ground. That list, not the map alone, is your critical source areas.

Open the map on your phone →

Reading the hectare figure on a farm

Every flow path is classed by the land draining through it, in fixed hectare bands. The smallest path drawn on a block-sized area drains 0.1 ha; across a whole farm the cut-off rises and the panel says where it sits.

LineLand draining throughWhat it usually is on a farm
Minor flow pathunder 0.4 haA shallow swale within a paddock. Runs only in heavy rain. Easy to miss, and easy to leave in grass.
Overland flow path0.4–10 haA swale or small gully gathering one or several paddocks. The usual critical source area.
Watercourse10–100 haA gully or drain carrying a hillside. Often already a waterway in winter.
Stream or riverover 100 haA stream or river. A waterway in its own right, with its own rules.

An example: one winter crop paddock

Illustrative, not a real farm. A farmer is choosing between two paddocks for next winter’s crop. Both look much the same from the gate. Flow Paths shows the first has two short swales, each draining under a hectare, that die out on the flat. The second has one swale running corner to corner that drains 14 ha, most of it from the hill block above the fence, and it leaves the paddock at the culvert into the creek.

None of that is news to someone who has farmed the place for twenty years. What the map adds is the number, the land above the fence, and something to put in front of an adviser or a new manager. The farmer still decides what to do with it: pick the first paddock, or crop the second and leave the swale in grass.

Take it to your adviser

Saving the map as an image is free. With a pass, the flow paths export as GeoJSON or KML for a GIS or Google Earth, and the slope and wetness maps as GeoTIFF.

What this cannot tell you

  • How much sediment or nutrient is lost. Nothing here models soil, fertiliser, stock or crop. It maps where water goes, not what it carries.
  • What the drains do. Tile drains, culverts, pipes and narrow open drains are not in the terrain, so water is routed over the surface as if they were not there.
  • How much rain it takes. A path on the map may run every week in winter or once in five years. The hectare figure is a guide, and your own eyes are better.
  • What has changed since the survey. The ground is as the LiDAR recorded it. New tracks, drains and earthworks since then are not shown. The panel names the survey and the years it was flown.
  • What the rules require. Those come from your regional council and national regulations, and they have been changing. Ask before you rely on a number.

Related guides

Frequently asked questions

What is a critical source area?

A small part of a farm that sends a large share of the sediment, nutrients and bacteria to water. New Zealand’s 2020 freshwater regulations described one as a landscape feature such as a gully, swale or depression that accumulates runoff from adjacent land and delivers, or could deliver, contaminants to a river, lake, wetland or drain. In practice it is the low line in a paddock that runs after heavy rain, and the hollow where water sits.

How do I find critical source areas on my farm?

Start with a map of where runoff gathers, then walk it. A flow path map from LiDAR shows the gullies and swales and how many hectares drain through each. A ponding map shows the depressions that hold water. Compare both with what you see after heavy rain, and note which paths reach a stream, drain or wetland and what is grazed or cropped along them.

Can a LiDAR map identify critical source areas for me?

It can show the likely ones, not confirm them. The terrain tells you where water gathers and how much land feeds each spot. It does not know your soil, your stock, your crop or your tile drains, and it does not model sediment or nutrient loss. A flow path through a fenced, planted gully is a different risk from the same path through a winter crop.

How small a swale does the map show?

On a block-sized area, any path with 0.1 ha or more of land draining through it. Across a whole farm the smallest paths are left off so the map stays readable, and the panel says where the cut-off sits. Run a single paddock or block to see the fine detail.

Does it work on flat land?

Less well. On flat ground a few centimetres decide which way water goes, and farm drains and tile drains, which the terrain cannot see, do most of the work. The ponding and wetness views are usually more use than the flow lines on a flat dairy platform.

What are the rules for critical source areas?

They are set by regional councils and by national regulations, they differ between regions, and the national rules were being revised when this guide was written in November 2026. Ask your regional council or your farm adviser what applies to your farm now.